dmesg - Asus X51R
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.3.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160114 (Debian 5.3.1-6) ) #1 SMP Debian 4.3.3-7 (2016-01-19)
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000077fa7fff] usable
BIOS-e820: [mem 0x0000000077fa8000-0x0000000077faffff] ACPI NVS
BIOS-e820: [mem 0x0000000077fb0000-0x0000000077fbdfff] ACPI data
BIOS-e820: [mem 0x0000000077fbe000-0x0000000077feffff] ACPI NVS
BIOS-e820: [mem 0x0000000077ff0000-0x0000000077ffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: ASUSTeK Computer Inc. X51R /X51R , BIOS 209 07/31/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x77fa8 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FF8000000 write-back
2 base 088000000 mask FFC000000 write-back
3 base 08C000000 mask FFE000000 write-back
4 base 08E000000 mask FFF000000 write-back
5 base 08F000000 mask FFF800000 write-back
6 base 090000000 mask FF0000000 write-combining
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01d24000, 0x01d24fff] PGTABLE
BRK [0x01d25000, 0x01d25fff] PGTABLE
BRK [0x01d26000, 0x01d26fff] PGTABLE
init_memory_mapping: [mem 0x77c00000-0x77dfffff]
[mem 0x77c00000-0x77dfffff] page 2M
BRK [0x01d27000, 0x01d27fff] PGTABLE
init_memory_mapping: [mem 0x60000000-0x77bfffff]
[mem 0x60000000-0x77bfffff] page 2M
init_memory_mapping: [mem 0x40000000-0x5fffffff]
[mem 0x40000000-0x5fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x3fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x77e00000-0x77fa7fff]
[mem 0x77e00000-0x77fa7fff] page 4k
BRK [0x01d28000, 0x01d28fff] PGTABLE
RAMDISK: [mem 0x35d62000-0x36ea8fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7F50 000024 (v02 ACPIAM)
ACPI: XSDT 0x0000000077FB0100 00005C (v01 A.M.I OEMXSDT 07000731 MSFT 00000097)
ACPI: FACP 0x0000000077FB0290 0000F4 (v03 A.M.I OEMFACP 07000731 MSFT 00000097)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20150818/tbfadt-623)
ACPI: DSDT 0x0000000077FB0630 0077A4 (v01 T12R0 T12R0000 00000000 INTL 20051117)
ACPI: FACS 0x0000000077FBE000 000040
ACPI: FACS 0x0000000077FBE000 000040
ACPI: APIC 0x0000000077FB0390 00005C (v01 A.M.I OEMAPIC 07000731 MSFT 00000097)
ACPI: MCFG 0x0000000077FB03F0 00003C (v01 A.M.I OEMMCFG 07000731 MSFT 00000097)
ACPI: SLIC 0x0000000077FB0430 000176 (v01 A.M.I OEMSLIC 07000731 MSFT 00000097)
ACPI: BOOT 0x0000000077FB0600 000028 (v01 A.M.I OEMBOOT 07000731 MSFT 00000097)
ACPI: OEMB 0x0000000077FBE040 00005B (v01 A.M.I AMI_OEM 07000731 MSFT 00000097)
ACPI: SSDT 0x0000000077FBE2A0 0001EF (v01 AMI CPU_CST 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000077fa7fff]
NODE_DATA(0) allocated [mem 0x77fa4000-0x77fa7fff]
[ffffea0000000000-ffffea0001dfffff] PMD -> [ffff880075800000-ffff8800775fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x0000000077fa7fff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x0000000077fa7fff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000077fa7fff]
On node 0 totalpages: 491334
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 7615 pages used for memmap
DMA32 zone: 487336 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 1 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0x78000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff880077c00000 s93016 r8192 d29864 u1048576
pcpu-alloc: s93016 r8192 d29864 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 483634
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1902836K/1965336K available (5675K kernel code, 1050K rwdata, 2796K rodata, 1296K init, 836K bss, 62500K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
NR_IRQS:33024 nr_irqs:440 16
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 1596.220 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.44 BogoMIPS (lpj=6384880)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150818
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
ftrace: allocating 23625 entries in 93 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Celeron(R) M CPU 520 @ 1.60GHz (family: 0x6, model: 0xf, stepping: 0x6)
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (3192.44 BogoMIPS)
devtmpfs: initialized
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
PM: Registering ACPI NVS region [mem 0x77fa8000-0x77faffff] (32768 bytes)
PM: Registering ACPI NVS region [mem 0x77fbe000-0x77feffff] (204800 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0xff set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC started
ACPI: Executed 4 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x78000000-0xffffffff window]
pci 0000:00:00.0: [1002:5a31] type 00 class 0x060000
pci 0000:00:01.0: [1002:5a3f] type 01 class 0x060400
pci 0000:00:04.0: [1002:5a36] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1002:5a37] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:5a38] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1002:5a39] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
pci 0000:00:12.0: reg 0x10: [io 0xe800-0xe807]
pci 0000:00:12.0: reg 0x14: [io 0xe400-0xe403]
pci 0000:00:12.0: reg 0x18: [io 0xe000-0xe007]
pci 0000:00:12.0: reg 0x1c: [io 0xdc00-0xdc03]
pci 0000:00:12.0: reg 0x20: [io 0xd800-0xd80f]
pci 0000:00:12.0: reg 0x24: [mem 0xfebffc00-0xfebfffff]
pci 0000:00:12.0: set SATA to AHCI mode
pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfebfe000-0xfebfefff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
pci 0000:00:13.2: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
pci 0000:00:13.3: reg 0x10: [mem 0xfebfb000-0xfebfbfff]
pci 0000:00:13.3: System wakeup disabled by ACPI
pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
pci 0000:00:13.4: reg 0x10: [mem 0xfebfa000-0xfebfafff]
pci 0000:00:13.4: System wakeup disabled by ACPI
pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
pci 0000:00:13.5: reg 0x10: [mem 0xfebff800-0xfebff8ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
pci 0000:00:14.1: [1002:438c] type 00 class 0x010182
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfebf4000-0xfebf7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:01:05.0: [1002:5a62] type 00 class 0x030000
pci 0000:01:05.0: reg 0x10: [mem 0x90000000-0x9fffffff pref]
pci 0000:01:05.0: reg 0x14: [io 0x7800-0x78ff]
pci 0000:01:05.0: reg 0x18: [mem 0xf88f0000-0xf88fffff]
pci 0000:01:05.0: reg 0x30: [mem 0xf88c0000-0xf88dffff pref]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xf8800000-0xf88fffff]
pci 0000:00:01.0: bridge window [mem 0x8ff00000-0xafefffff pref]
pci 0000:02:00.0: [168c:002a] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf89f0000-0xf89fffff 64bit]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xf8900000-0xf89fffff]
acpiphp: Slot [1] registered
pci 0000:00:05.0: PCI bridge to [bus 03-05]
pci 0000:00:05.0: bridge window [io 0x8000-0x9fff]
pci 0000:00:05.0: bridge window [mem 0xf8a00000-0xfc9fffff]
pci 0000:00:05.0: bridge window [mem 0xaff00000-0xcfefffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 06]
pci 0000:00:07.0: PCI bridge to [bus 07]
pci 0000:08:01.0: [1180:0476] type 02 class 0x060700
pci 0000:08:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
pci 0000:08:01.0: supports D1 D2
pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:01.0: System wakeup disabled by ACPI
pci 0000:08:01.1: [1180:0822] type 00 class 0x080500
pci 0000:08:01.1: reg 0x10: [mem 0xfeaffc00-0xfeaffcff]
pci 0000:08:01.1: supports D1 D2
pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:01.1: System wakeup disabled by ACPI
pci 0000:08:01.2: [1180:0592] type 00 class 0x088000
pci 0000:08:01.2: reg 0x10: [mem 0xfeaff800-0xfeaff8ff]
pci 0000:08:01.2: supports D1 D2
pci 0000:08:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:07.0: [10ec:8139] type 00 class 0x020000
pci 0000:08:07.0: reg 0x10: [io 0xb800-0xb8ff]
pci 0000:08:07.0: reg 0x14: [mem 0xfeaff400-0xfeaff4ff]
pci 0000:08:07.0: supports D1 D2
pci 0000:08:07.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:08:07.0: System wakeup disabled by ACPI
pci 0000:00:14.4: PCI bridge to [bus 08-09] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xa000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfca00000-0xfeafffff]
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfefffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x78000000-0xffffffff window] (subtractive decode)
pci_bus 0000:09: busn_res: can not insert [bus 09-ff] under [bus 08-09] (conflicts with (null) [bus 08-09])
pci_bus 0000:09: busn_res: [bus 09-ff] end is updated to 0c
pci_bus 0000:09: busn_res: can not insert [bus 09-0c] under [bus 08-09] (conflicts with (null) [bus 08-09])
pci_bus 0000:09: [bus 09-0c] partially hidden behind transparent bridge 0000:08 [bus 08-09]
pci 0000:00:14.4: bridge has subordinate 09 but max busn 0c
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 12) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 12)
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:05.0
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x77fa8000-0x77ffffff]
clocksource: Switched to clocksource refined-jiffies
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b00-0x0b1f] could not be reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [io 0x4000-0x40fe] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed89fff] has been reserved
system 00:01: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:01: [mem 0xfff80000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: Plug and Play ACPI device, IDs SYN0a04 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x025c] has been reserved
system 00:05: [io 0x025d] has been reserved
system 00:05: [io 0x025e] has been reserved
system 00:05: [io 0x025f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0x77ffffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
clocksource: Switched to clocksource acpi_pm
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xf8800000-0xf88fffff]
pci 0000:00:01.0: bridge window [mem 0x8ff00000-0xafefffff pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xf8900000-0xf89fffff]
pci 0000:00:05.0: PCI bridge to [bus 03-05]
pci 0000:00:05.0: bridge window [io 0x8000-0x9fff]
pci 0000:00:05.0: bridge window [mem 0xf8a00000-0xfc9fffff]
pci 0000:00:05.0: bridge window [mem 0xaff00000-0xcfefffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 06]
pci 0000:00:07.0: PCI bridge to [bus 07]
pci 0000:08:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
pci 0000:08:01.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
pci 0000:08:01.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
pci 0000:08:01.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
pci 0000:08:01.0: res[13]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
pci 0000:08:01.0: res[13]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
pci 0000:08:01.0: res[14]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
pci 0000:08:01.0: res[14]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
pci 0000:08:01.0: BAR 0: assigned [mem 0x78000000-0x78000fff]
pci 0000:08:01.0: BAR 15: assigned [mem 0xd0000000-0xd3ffffff pref]
pci 0000:08:01.0: BAR 16: assigned [mem 0x7c000000-0x7fffffff]
pci 0000:08:01.0: BAR 13: assigned [io 0xa000-0xa0ff]
pci 0000:08:01.0: BAR 14: assigned [io 0xa400-0xa4ff]
pci 0000:08:01.0: CardBus bridge to [bus 09-0c]
pci 0000:08:01.0: bridge window [io 0xa000-0xa0ff]
pci 0000:08:01.0: bridge window [io 0xa400-0xa4ff]
pci 0000:08:01.0: bridge window [mem 0xd0000000-0xd3ffffff pref]
pci 0000:08:01.0: bridge window [mem 0x7c000000-0x7fffffff]
pci 0000:00:14.4: PCI bridge to [bus 08-09]
pci 0000:00:14.4: bridge window [io 0xa000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfca00000-0xfeafffff]
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfefffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0x78000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0xf8800000-0xf88fffff]
pci_bus 0000:01: resource 2 [mem 0x8ff00000-0xafefffff pref]
pci_bus 0000:02: resource 1 [mem 0xf8900000-0xf89fffff]
pci_bus 0000:03: resource 0 [io 0x8000-0x9fff]
pci_bus 0000:03: resource 1 [mem 0xf8a00000-0xfc9fffff]
pci_bus 0000:03: resource 2 [mem 0xaff00000-0xcfefffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xa000-0xbfff]
pci_bus 0000:08: resource 1 [mem 0xfca00000-0xfeafffff]
pci_bus 0000:08: resource 2 [mem 0xcff00000-0xdfefffff pref]
pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:08: resource 8 [mem 0x78000000-0xffffffff window]
pci_bus 0000:09: resource 0 [io 0xa000-0xa0ff]
pci_bus 0000:09: resource 1 [io 0xa400-0xa4ff]
pci_bus 0000:09: resource 2 [mem 0xd0000000-0xd3ffffff pref]
pci_bus 0000:09: resource 3 [mem 0x7c000000-0x7fffffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17692K (ffff880035d62000 - ffff880036ea9000)
microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 512 (order: 3, 32768 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1463005817.819:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
GHES: HEST is not enabled!
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
zswap: loaded using pool lzo/zbud
rtc_cmos 00:00: setting system clock to 2016-05-11 22:30:18 UTC (1463005818)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1296K (ffffffff81b08000 - ffffffff81c4c000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 456K (ffff88000158e000 - ffff880001600000)
Freeing unused kernel memory: 1300K (ffff8800018bb000 - ffff880001a00000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
random: udevadm urandom read with 1 bits of entropy available
SCSI subsystem initialized
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (57 C)
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:13.5: EHCI Host Controller
ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:13.5: debug port 1
ehci-pci 0000:00:13.5: irq 19, io mem 0xfebff800
ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.3.0-1-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:13.5
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:13.0: irq 16, io mem 0xfebfe000
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:08:01.1: SDHCI controller found [1180:0822] (rev 17)
sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:08:01.1: No vmmc regulator found
sdhci-pci 0000:08:01.1: No vqmmc regulator found
sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
libata version 3.00 loaded.
sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: SDHCI controller on PCI [0000:08:01.1] using DMA
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:08:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:08:07.0 eth0: RealTek RTL8139 at 0xffffc900003ac400, 00:1b:fc:bf:94:40, IRQ 20
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 4.3.0-1-amd64 ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
scsi host0: pata_atiixp
scsi host1: pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe80 irq 22
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:13.1: irq 17, io mem 0xfebfd000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 4.3.0-1-amd64 ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-pci 0000:00:13.2: OHCI PCI host controller
ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.2: irq 18, io mem 0xfebfc000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.3.0-1-amd64 ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci-pci 0000:00:13.3: OHCI PCI host controller
ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.3: irq 17, io mem 0xfebfb000
ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
ata1.01: configured for UDMA/33
scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WP03 PQ: 0 ANSI: 5
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.3.0-1-amd64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci-pci 0000:00:13.4: OHCI PCI host controller
ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.4: irq 18, io mem 0xfebfa000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.3.0-1-amd64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: softreset failed (device not ready)
ata3: applying PMP SRST workaround and retrying
tsc: Refined TSC clocksource calibration: 1596.100 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1701c0e736d, max_idle_ns: 440795279382 ns
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD3200BEVT-24A23T0, 01.01A02, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 1A02 PQ: 0 ANSI: 5
psmouse serio4: synaptics: Touchpad model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0/0x0, board id: 0, fw id: 30712
sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
sda: sda1 sda2 sda3 < sda5 > sda4
sd 2:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
SGI XFS with ACLs, security attributes, realtime, no debug enabled
clocksource: Switched to clocksource tsc
XFS (sda4): Mounting V4 Filesystem
XFS (sda4): Starting recovery (logdev: internal)
random: nonblocking pool is initialized
XFS (sda4): Ending recovery (logdev: internal)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Service...
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started LVM2 metadata daemon.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Journal Service.
systemd-journald[173]: Received request to flush runtime journal from PID 1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input10
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input11
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
ACPI: Power Button [PWRF]
clocksource: Switched to clocksource acpi_pm
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
acpi device:02: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input13
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
asus_laptop: Asus Laptop Support version 0.42
asus_laptop: BSTS called, 0x7f returned
asus_laptop: X51R model detected
input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input14
sr 0:0:1:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SMB0) (20150818/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
yenta_cardbus 0000:08:01.0: CardBus bridge found [1043:1627]
[drm] Initialized drm 1.1.0 20060810
yenta_cardbus 0000:08:01.0: ISA IRQ mask 0x0cb8, PCI irq 21
yenta_cardbus 0000:08:01.0: Socket status: 30000006
pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #09 to #0c
yenta_cardbus 0000:08:01.0: pcmcia: parent PCI bridge window: [io 0xa000-0xbfff]
yenta_cardbus 0000:08:01.0: pcmcia: parent PCI bridge window: [mem 0xfca00000-0xfeafffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xfca00000-0xfeafffff:
excluding 0xfe8f0000-0xfeafffff
yenta_cardbus 0000:08:01.0: pcmcia: parent PCI bridge window: [mem 0xcff00000-0xdfefffff pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xcff00000-0xdfefffff:
excluding 0xcff00000-0xdfefffff
r592: driver successfully loaded
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x13
sp5100_tco: failed to find MMIO address, giving up.
[drm] radeon kernel modesetting enabled.
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC660-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xcffff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
[drm] initializing kernel modesetting (RS400 0x1002:0x5A62 0x1043:0x1402).
[drm] register mmio base: 0xF88F0000
[drm] register mmio size: 65536
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used)
radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[drm] Detected VRAM RAM=128M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 961790 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: power management initialized
[drm] radeon: 1 quad pipes, 1 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x0000000071480000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0xffff880074530000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[drm] radeon: irq initialized.
[drm] Loading R300 Microcode
input: PC Speaker as /devices/platform/pcspkr/input/input18
radeon 0000:01:05.0: firmware: direct-loading firmware radeon/R300_cp.bin
[drm] radeon: ring at 0x0000000080001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] Panel ID String: LPL
[drm] Panel Size 1280x800
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC2
[drm] Connector 1:
[drm] LVDS-1
[drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[drm] Encoders:
[drm] LCD1: INTERNAL_LVDS
[drm] fb mappable at 0x90040000
[drm] vram apper at 0x90000000
[drm] size 4096000
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:01:05.0 on minor 0
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90000820000, irq=16
Adding 7811068k swap on /dev/sda5. Priority:-1 extents:1 across:7811068k FS
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
8139too 0000:08:07.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
wlan0: authenticate with 60:e3:27:72:4d:42
wlan0: send auth to 60:e3:27:72:4d:42 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:e3:27:72:4d:42 (try 1/3)
wlan0: RX AssocResp from 60:e3:27:72:4d:42 (capab=0x431 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
perf interrupt took too long (2542 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5022 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
wlan0: deauthenticating from 60:e3:27:72:4d:42 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.031 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 585.828 msecs
PM: late suspend of devices complete after 0.499 msecs
ehci-pci 0000:00:13.5: System wakeup enabled by ACPI
ohci-pci 0000:00:13.4: System wakeup enabled by ACPI
ohci-pci 0000:00:13.3: System wakeup enabled by ACPI
ohci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci-pci 0000:00:13.1: System wakeup enabled by ACPI
ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.224 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
ACPI: Waking up from system sleep state S3
ahci 0000:00:12.0: set SATA to AHCI mode
ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
ohci-pci 0000:00:13.1: System wakeup disabled by ACPI
ohci-pci 0000:00:13.2: System wakeup disabled by ACPI
ohci-pci 0000:00:13.3: System wakeup disabled by ACPI
ohci-pci 0000:00:13.4: System wakeup disabled by ACPI
ehci-pci 0000:00:13.5: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 16.329 msecs
PM: early resume of devices complete after 0.293 msecs
[drm] radeon: 1 quad pipes, 1 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x0000000071480000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0xffff880074530000
[drm] radeon: ring at 0x0000000080001000
sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[drm] ring test succeeded in 0 usecs
[drm] ib test succeeded in 0 usecs
rtc_cmos 00:00: System wakeup disabled by ACPI
usb usb6: root hub lost power or was reset
usb usb5: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb2: root hub lost power or was reset
usb usb1: root hub lost power or was reset
sd 2:0:0:0: [sda] Starting disk
ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
ata1.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
ata1.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
ata1.01: configured for UDMA/33
PM: resume of devices complete after 355.054 msecs
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
ata3: softreset failed (device not ready)
ata3: applying PMP SRST workaround and retrying
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
8139too 0000:08:07.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
8139too 0000:08:07.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 60:e3:27:72:4d:42
wlan0: send auth to 60:e3:27:72:4d:42 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:e3:27:72:4d:42 (try 1/3)
wlan0: RX AssocResp from 60:e3:27:72:4d:42 (capab=0x431 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: deauthenticating from 60:e3:27:72:4d:42 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
8139too 0000:08:07.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 60:e3:27:72:4d:42
wlan0: send auth to 60:e3:27:72:4d:42 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:e3:27:72:4d:42 (try 1/3)
wlan0: RX AssocResp from 60:e3:27:72:4d:42 (capab=0x431 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
conftest[27413]: segfault at 0 ip 0000000000400680 sp 00007ffe30151cb0 error 4 in conftest[400000+1000]
conftest[27441]: segfault at 0 ip 00007f24eb7e1996 sp 00007ffcd3054e68 error 4 in libc-2.22.so[7f24eb6b9000+19a000]